Mitel 5235 IP Phone - Manual (Page 25)

Call Handling
• To talk to this party, wait until the connection is established, speak to the party,
press (TRANS/CONF) or press TRANSFR and then hang up. This is an
Attended Call Transfer.
• To transfer the call without speaking to this party, immediately press
(TRANS/CONF) or press TRANSFR and then hang up. The held call will be
transferred to the call in progress. This is an Unattended Call Transfer.
• To cancel the transfer, press
(CANCEL). You are returned to the held call.
Transfer a Call to a Third Party Already on Hold
1. While on a call, press (TRANS/CONF). The call is put on hold.
2. Press the Line key of the call on hold, and then press (TRANS/CONF).
3. Hang up.
Conference Call (Three-Way)
When two parties are connected on a call, either of those parties can originate a three-
way conference by adding a third party to the call in progress. Once three parties are
connected, no more parties can be added to that call.
A party can be involved in more than one three-way conference call at a time, but the
calls cannot be merged. For example, A and B are on a call. A adds C to create three-
way conference call ABC. B adds D to the call with A to make conference call ABD. ABC
and ABD remain separate– D is not added to conference call ABC.
Note: During a conference call, any party can perform a call transfer when one line on
the phone that initiated the conference call is not in use. For call transfer
information, see Call Transfer on page 18.
Add a Third Party to a Call in Progress
1. Press (TRANS/CONF). The current call is put on hold.
2. Press a free Line key, and then do one of the following:
• Dial the number.
• Press
a Speed Dial key.
• Press
REDIAL.
3. Press DIAL.
4. When the new party answers, press the CONF softkey. The call put on hold in step
1 is connected to the call in progress.
Note: If the new party does not answer, press (CANCEL) twice to return to the held
party.
Add a Party On Hold to a Call in Progress
1. Press (TRANS/CONF). The current call is put on hold.
2. Press the Line key of the party already on hold.
- 19 -