Miglia Technology AlchemyTV User Manual
Page 32
Destination controls the audio output of the recorded audio during live playback.
Internal:
The internal speaker of your PowerMac or the speakers attached to it will be used
External:
The speakers you may have connected to the audio out of the AlchemyTV card will
be used. This can be used to pass-through the audio to another device.
Internal and
External:
Both outputs will be used.
Sample controls the sample rate, the size and the mode (mono/stereo).
Note that the 48KHz setting is only available on the DVRPCI-SIL, DVRPCI-NTSC, TVPCI-SIL,
TVPCI-NTSC models. The ‘older’ G4-only PAL/SECAM version of AlchemyTV does not support
48 KHz.
The best settings usually are: 48.000 kHz, 16 bits, Stereo.
AlchemyTV DVR™ User Guide
Page 30