Miele S 6000 - Manual (Page 17)

Cleaning the floor roller (see fig. 33)
(not possible with the AirTeQ SBD 650-3
Standard floor brush or FiberTeQ SBD
470-3)
a Unlock the roller pin with a coin.
b Push the pin out and remove it.
c Remove the roller.
^ Remove any threads and hair from
the roller.
^ Replace roller in the reverse order.
Cleaning and care
,
Turn off the vacuum and unplug
it from the outlet before performing
any maintenance work.
Vacuum cleaner with textile surface
Clean the surface with the dust brush
accessory or a damp cloth.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic
accessories can be cleaned with a
damp cloth or a cleaner suitable for
plastics.
,
Do not use abrasive, glass or all
purpose cleaners, or oil-based
conditioning agents! They will
damage the surface.
Dust compartment
The dust compartment can, if
necessary, be cleaned using a dry
cloth, dusting brush or a second
vacuum to remove any dust.
Monitor the airflow indicator and
inspect all filters regularly. Clean or
replace them when necessary
according to these Operating
Instructions.
,
Do not submerge the vacuum in
water. If moisture gets into the
appliance there is the risk of an
electric shock.
Frequently asked questions
,
Turn off and unplug the vacuum
cleaner before performing any
maintenance work.
What if the vacuum turns off
automatically?
The vacuum has overheated. The
temperature limiter automatically turns
the vacuum off.
This can occur if, for instance, large
articles block the suction tube or when
the dust bag is full or contains particles
of fine dust. A heavily soiled exhaust or
dust compartment filter can also be the
cause of overheating. Turn the vacuum
off
s and pull the plug from the outlet.
Check for any blockages and allow the
vacuum to cool for 30 minutes.
Optional accessories
Observe the cleaning instructions of
the floor manufacturer.
Many of these accessories as well as
other products can be purchased from
the Miele Store at www.Mieleusa.com.
en
17