26 timer recording, Helpful hints – Philips Magnavox MC13D1MG User Manual

Page 26

For a one-time recording, press PLAY/▲ until the
desired date appears.
Or, to record a TV program at the same time on
the same channel every day, press STOP/▼ until
EVRY DAY appears.
Or, to record a TV program at the same time on
the same channel every week, for example every
Monday, press STOP/▼ until EVRY and your
desired day of the week appear together.
Finally, press F.FWD/B.

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

61 7/05 FRI -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

26 Timer Recording

Follow the steps below to program the TV/VCR to record TV pro-
grams while you’re away from home. The TV/VCR will turn itself
on, record, and turn itself off automatically.

Before you begin, make sure ...

●

The clock is set. If the clock is not set, MANUAL CLOCK SET
appears. See page 14 to set the clock, then set the recording.

●

Channels are set. Details are on pages eight and 10.

●

A tape is in the TV/VCR.

Press MENU. Press PLAY/▲ or STOP/▼ to select
TIMER PROGRAMMING. Press F.FWD/B.

Press PLAY/▲ or STOP/▼ to select a program posi-
tion. Then, press F.FWD/B.

Press PLAY/▲ or STOP/▼ until the desired channel
number appears. (Example: CH61) Then press
F.FWD/B. If the TV/VCR is connected to a Cable Box or
Satellite Box, the TV/VCR must be on CH3 or CH4. Set CH
as 03 or 04 in the Timer Programming menu. Select the
channel to be recorded on the Cable Box/Satellite Box.

• If you are using Timer recording,

you may not operate the unit
manually.

• The erase-prevention tab on the

cassette must be in place (or you
must put tape over the hole).

• If the erase-prevention tab is

removed, the cassette will eject
when you press POWER to turn
off the TV/VCR.

• If the tape ends before the

recording is complete, the TV/VCR
will stop recording immediately
and eject the tape.

Helpful Hints

Example:
one-time
recording

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

– M E N U –

TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER’S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH

– TIMER PROGRAMMING –

CH DATE BEGIN END

- - -/- - - - - -:- - -:- - - -

61 -/- - - - - -:- - -:- - - -

- - -/- - - - - -:- - -:- - - -

TIME SEARCH

MUTE

RECORD

SPEED

RESET

PAUSE/STILL

+100

STOP

F.FWD

PLAY

REW

VOL.

DISPLAY

POWER

SLEEP/WAKE UP

CH.

ALT.CH

1-4

MC13D1MG 3/22/02 1:26 PM Page 26

This manual is related to the following products:

MC19D1MG