Morphy Richards AD29405 - Manual (Page 6)

6 6 4 4 w ww ww w..m mo orrp ph hyyrriic ch ha arrd ds sa au ud diio o..c co om m
Easy set up guide
1 1 Fully extend the telescopic
aerial.
2 2 Insert the mains connector or
eight ‘D’ size batteries into the
battery compartment.
3 3 Press STANDBY/ON to turn on
the unit. The display will light up
and ‘HELLO’ will show on the
display.
4 4 Press FUNCTION to select the
desired function.
5 5 Adjust the volume by pressing
VOLUME UP or VOLUME DOWN
to a suitable level.
6 6 To turn the unit off, press
STANDBY/ON.
CD OPERATION
Normal play
Press ON/STANDBY button to
turn on the unit.
1 1 Make sure the unit is in CD
mode by pressing FUNCTION.
2 2 Open the CD door and load the
CD onto the pivot, then close
the door.
3 3 Press PLAY/PAUSE to play CD,
the CD track and play time will
show on the display.
4 4 To select a particular track,
press and hold REW or FFWD.
5 5 To quickly advance through
music, press REW or FFWD.
6 6 To stop CD play back, press the
STOP button.
NOTE:
• If the CD door is open, OPEN
appears on the LCD.
• If the disc compartment is
empty, or the disc cannot be
played, ‘no disc’ is displayed
showing continuously on the
LCD.
• Do not store CDs in damp
areas. Do not expose CDs to
high temperatures.
• You should avoid leaving the CD
door open, dust is liable to
impair performance of the laser
optical unit.
Repeat play
The repeat feature allows you to
play one track, a complete disc
or a directory.
1 1 To play one track repeatedly,
press REPEAT once. Repeat
one icon will appear on the
display.
2 2 To display all tracks repeatedly,
press REPEAT twice. Repeat all
icons ALL will appear on the
display.
3 3 To play one directory repeatedly,
press REPEAT 3 times. Repeat
directory icon DIR will appear
on the display. (for MP3, WWA
data disc only).
4 4 To cancel the repeat function,
press the REPEAT button until
the repeat icon disappears.
Intro play
(for remote control only)
• Intro Play is for introduction
playback of every track for the
first 10 seconds.
• Press INTRO on the remote to
start intro play STOP mode.
• Press INTRO on the remote to
toggle between INTRO play and
normal play during PLAY/PAUSE
mode.
• INTRO is shown on second line
of the display when intro mode
is active.