Clock setting, Setting the clock, Record function – Morphy Richards AD29405 User Manual
Page 11: Timer function setting timer, Record timer
1
11
1
U
UK
K H
He
ellp
plliin
ne
e
0
08
87
70
0 0
06
60
0 2
26
61
10
0
IIrre
ella
an
nd
d H
He
ellp
plliin
ne
e
1
18
80
00
0 4
40
09
91
11
19
9
CLOCK SETTING
To view the time in standby
mode when the unit is plugged
in, press any key except
STANDBY/ON, the back light
will then light up for 5 seconds,
displaying the time.
Setting the clock
1
1
Press MENU, then press
FFWD/REW, until CLOCK is
displayed on thee LCD.
2
2
Press PLAY/PAUSE, the hour
digits will flash, press
FFWD/REW to adjust the hour.
3
3
Press PLAY/PAUSE to confirm
the hour digits then the minutes
digits will flash, press
FFWD/REW to adjust the
minute digits. The minutes do
not carry over to the hours when
the minutes change from 59 to
00. Refer to table 2
NOTE: When AC power fails, the
clock will reset to the default
setting.
Record function
1
1
Press MENU, RECORD will be
displayed, then press
PLAY/PAUSE enter, press
FFWD/REW to selected
RECORD source: REC CARD or
REC USB. Refer to table 3.
2
2
Make sure the USB or SD CARD
is connected.
3
3
For example. To record the track
006 of the CD to a SD card.
4
4
Turn on the system (CD or FM
or AUX IN). Turn on the CD and
select 006, press PLAY/PAUSE
to play this track, then press
REC, RECORDING is displayed
for 2 seconds, then appears
REC CARD for REC CARD for 2
seconds, then return to normal
CD Mode, REC and CARD while
flash, this is recording.
5
5
Press STOP to stop recording.
TIMER FUNCTION
Setting timer
1
1
Then press FFWD/RWD until
‘TIMER’ display on the LCD.
2
2
Press PLAY/PAUSE to go to
enter timer mode setting, ‘ON
TIME’ will show on the LCD.
3
3
Press PLAY/PAUSE to enter,
then press FFWD/REW to adjust
the minute when the minute
digits are flashing.
4
4
Press PLAY/PAUSE to confirm
the hour, then press FFWD/REW
to adjust the minute when the
minute digits are flashing. The
minutes do not carry over the
hours when the minutes change
from 59 to 00.
5
5
Press PLAY/PAUSE to confirm
the time when the unit will come
on, ‘ON TIME’, then repeat
process point 4 and 5 to set the
time of ‘TIME OFF’.
6
6
Then set the SOURCE of timer
(DISC,SD,USB, TUNER, AUX)
using the FFWD/REW buttons.
7
7
Then set the VOLUME of timer
using the FFWD/REW buttons.
8
8
Press the MENU buttons until
the display returns back to the
main display.
9
9
Press TIMER button on the
remote control or REC/TIMER
button on the unit when the
system is in the standby mode.
Record timer
1
1
Press MENU, then select
‘RECORD’ by PRESSING
FFWD/REW and confirm with
PLAY/PAUSE button. Then
select either ‘REC CARD’ or
‘REC USB’ by pressing
FFWD/REW and confirm by
PLAY/PAUSE button.
2
2
Set the TIMER using the same
method as in the TIMER function
section.
3
3
Press PLAY/PAUSE and enter
the TIMER SOURCE, use the
FFWD/RWD buttons to select
the ‘PRE REC’ by pressing
D