beautypg.com

Controls at a glance, 3step 5 start washer, Step 3 select water temperature – Maytag MAV6300 User Manual

Page 4: Step 4 select a customized cycle, Cont

background image

3

Step 5

START WASHER

CONTROLS AT A GLANCE

CONT.

HOT/COLD – White and heavily soiled,
color-fast items

WARM/WARM – Delicate or colorfast items

WARM/COLD – Moderately soiled,
colored items; most wrinkle free items

COLD/COLD – Brightly colored, lightly
soiled items; washable woolens

LOAD TYPE

REMEMBER: In wash water temperatures
below 65° F, detergents do not dissolve well
or clean well. Care labels define cold water
as up to 85° F.

If Auto Temperature Control (select
models)
is selected with a warm/warm,
warm/cold, or cold/cold water tempera-
ture setting, the light will illuminate dur-
ing the first fill.

CANCEL – Press this button to cancel and
reset any of the options.

SOAK

ONLY

PRESOAK

MAX

EXTRACT

NORMAL

SPIN

USE

SUPER WASH – Can be used with any
wash cycle to clean very heavily soiled
items. Provides fast agitation and normal
spin throughout all cycles.

EXTRA RINSE – Provides an additional
rinse at the end of the cycle to more com-
pletely remove laundry additives, suds, per-
fume, etc.

AUTO TEMPERATURE CONTROL (select
models)
– assures a cold water wash of
75°F and warm water wash of 95°F. This
option assures detergent will dissolve and
provide optimum cleaning results.

• Add detergent and any additives
• Add load and close lid
• Pull the control dial out to start

Step 3

Select Water

Temperature

Press the appropriate button to select the
wash and rinse temperatures. Follow the
garment care label for best results. Use the
chart at the right as a guide.

Step 4

Select A

Customized Cycle

Press the appropriate button(s) to select
one or more options.

PRESOAK:

Provides 12 minutes of agi-

tation and soak before going into the wash
cycle.

SOAK ONLY:

Provides three minutes of

agitation and then a soak, then three min-
utes of agitation before an extended soak.
Soak for 30 minutes or less.

MAX EXTRACT:

Provides three extra

minutes of spin to remove more moisture
from loads, such as towels. Can only be
used with the WHITES cycle.

NORMAL SPIN:

Provides adequate

water removal for most loads.

This manual is related to the following products: