Motorola GP344 - Manual (Page 23)

21 English
SC
A
N
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen different channels can
be programmed into each scan list. Each
channel can share the same scan list or have
different scan lists assigned to them.
Once the radio’s scan operation is activated
and the radio detects a call coming through a
channel in its scan list, it switches to that
channel for you to receive the call.
STARTING OR STOPPING SCAN
You can start or stop a scan operation by using
the
Scan button.
1. Press the Scan button to start scanning.
The scan start alert tone
will sound.
2. Press the Scan button again to stop scan-
ning. The scan stop alert tone
will sound.
The LED indicator will blink green during a
scan operation; it will stop blinking when the
radio switches to a channel.
TALKBACK
If the programmable Talkback option is set, you
can respond to any calls received during the
scan operation by pressing the PTT button
before the programmed hang-time ends. Check
with your dealer for details.