Philips Magnavox CCA252AT - Manual (Page 22)

F.FWD/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 41.
Press to change the setting of an item in the on-screen menu or
press to proceed to the next menu.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
PLAY/ ▲ Button
Press to play a tape. Details are on page 28. Press to release Search
or Still mode and return to normal playback. Details are on page
41. Press to select an item in the menu.
SLEEP Button
Press to set the sleep timer. Details are on page 47.
SPEED Button
Press to select the recording speed (SP or SLP).
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to
the previous volume level.
22 Remote Control Buttons
VOL(ume) m/n Button
Press to adjust the sound level. If you press the VOL(ume) m/n
button when the sound is muted, the sound will be restored.
POWER Button
Press to turn on or off the TV/VCR.
Number Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
● Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay.
(There also may be a brief delay when you select channels 10, 11, and
12.) If you want to select channels 100 and above, enter channel num-
bers as a three-digit number. For example, to select channel 117,
press 1, 1, 7.
● Antenna Users
Enter channel numbers as a two-digit number for the quickest results.
You may only select channels 2-69. For example, to select channel 5,
press 0,5. If you only press the Number 5 button, channel 5 will be
selected after a brief delay.
VOL.
CH.
3 2 1
6 5 4
9 8 7
0
POWER
STATUS/EXIT
TRACKING REC/OTR
SPEED MEMORY
ALT. CH
PAUSE/STILL
MUTE
F.FWD REW
PLAY
STOP
SLEEP
MENU CLEAR
CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 40.