beautypg.com

Vertical steam, No drip system, Auto shut-off – Morphy Richards 40692 User Manual

Page 6: Life long anti-scale system, Maintenance self cleaning, Gf f

background image

66

Vertical steam

F

F

Hold the iron in a vertical

position between 1cm and 2cm

away from the item F

F

. Press the

shot of steam button ⁄

, this will

create vertical steam. This

feature is especially useful for

removing creases from hanging

clothes, curtains, wall hangings,

etc.

Note; For optimum steam

quality, do not operate the shot

more than three times in

succession.

No drip system

Your iron is fitted with a no drip

system which is designed to

prevent water escaping from the

soleplate when the iron is too

cold.

During use, the no drip system

may emit a loud click,

particularly during heat-up or

whilst cooling down. This is

perfectly normal and indicates

that the system is functioning

correctly.

Auto shut-off

Your iron is fitted with the auto

shut-off function, it will

automatically shut down after a

set period. The ‘safety switch

off’ LED will flash on the

function panel.

If the iron is left unattended in

the horizontal position, it will

shut down after 1 minute.

If it is left in the vertical position,

it will shut down after 8 minutes.

To reactivate the iron, gently

shake it and wait for the iron to

heat-up as normal.

Life long anti-scale

system

The life long anti-scale system

reduces scale deposits and

helps prolong the life of the iron.

MAINTENANCE
Self cleaning

G

G

Your iron has a built in cleaning

system designed to keep the

water valve, steam chamber and

steam vents clear of lint and

loose mineral deposits.

1 Half fill the iron with water.

2 Place the iron on it’s heel.

3 Connect to a mains supply

outlet.

4 Set the temperature control to

‘MAX’. See ‘Temperature

control’ on page 5.

5 The indicator LED will flash until

the required temperature is

reached.

6 The indicator LED remains ‘on’

when the selected temperature

is attained.

7 Disconnect the iron from the

mains supply outlet.

8 Hold the iron horizontally over a

sink.

9 Press and hold down the

Self-clean button ‡

‡ G

G

.

10 Steam and boiling hot water will

drain from the holes in the

soleplate, washing away the

scale and minerals that have

built up inside the Steam

Chamber.

11 Gently move the iron back and

forth until the water tank is

empty.

12 When cleaning is complete,

release the Self-clean button ‡

.

13 Rest your steam iron back on

it’s heel and allow to fully cool

down.

14 Wipe the soleplate with a cold,

damp cloth.

After this cleaning operation,

empty out any remaining water.

G

G

F

F

UUKK HHeellpplliinnee 00884444 887711 00995533

RReeppllaacceem

meenntt PPaarrttss 00884444 887733 00771199

IIrreellaanndd HHeellpplliinnee 11880000 440099 111199

40692 rev2 20/6/08 14:32 Page 6