Musical Fidelity A3.2 - Manual (Page 9)

A3.2 Tuner Instructions for Use Page 9 of 9 Issue 1: March 2002
A3.2 FM Tuner
With RDS and Remote Control
Tuning range 87.5 MHz to 108 MHz in 50 kHz steps
Aerial (antenna) impedance 75 Ohms, coaxial
Usable sensitivity, mono 13 dBf
50dB quieting sensitivity, mono 19 dBf
stereo 42 dBf
Alternate channel selectivity 55 dB ±400 kHz
Image rejection, 98 MHz > 92 dB
Intermediate frequency 10.7 MHz
IF rejection, 98 MHz > 95 dB
Adjacent channel selectivity, I.H.F. 52 dB
Pilot suppression, I.E.C. 30 dB
Subcarrier suppression, I.E.C. 32 dB
Audio output at 1kHz, 75kHz dev. 500 mV
Audio frequency response 30 Hz to 15 kHz ± 1 dB
Total harmonic distortion 0.5 % at 75 kHz deviation
Stereo separation at 1 kHz > 38dB
Signal / noise ratio, mono > 68 dB
stereo > 65 dB
Power consumption 10 Watts
Power requirements 100 / 115 / 230 Volts AC ~ 50Hz (factory pre-set for country)
Dimensions (approx.) 440mm wide
100mm high including feet
400mm deep including terminals
Weight 5 kg unit only, un-boxed
7 kg in shipping carton
Standard accessories Remote control handset (universal type),
2 batteries (type SUM-4, AAA, LR03)
IEC mains lead
75 Ohm coaxial aerial (antenna) connector
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.
SPECIFICATIONS