Gdp-5000h — preparation for long -term storage – Multiquip High Cycle Generator GBP5000H User Manual
Page 19

GDP-5000H A.C. GENERATOR — OPERATION AND PARTS MANUAL — REV. #2 (07/23/08) — PAGE 19
Generator Storage
For storage of the generating set for over 30 days, the
following is required:
z Drain the fuel tank completely.
z Run the engine until the gasoline in the carburetor is
completely consumed.
z Completely drain the oil from the crankcase and refill
with fresh oil.
z Remove the spark plug, pour 2 or 3 cc of SAE 30 oil
into the cylinder and crank slowly to distribute the oil.
z Slowly rotate the engine a few times with the starter
Rope and install a new plug.
z Pull out the starter rope slowly and stop at the
compression point.
z Clean all external parts of the generating set with a cloth.
z Cover the generating set and store in a clean, dry place.
GDP-5000H — PREPARATION FOR LONG -TERM STORAGE