Mazda 2007 6 SPORTS SEDAN - Manual (Page 194)

Black plate (193,1)
NOTE
l When maximum cooling is desired,
set the temperature control dial to the
extreme cold position and set the air
intake selector to the
position,
then set the fan control dial to
position 4.
l If warmer air is desired at floor level,
set the mode selector dial at the
position and adjust the temperature
control dial to maintain maximum
comfort.
l The air to the floor is warmer than
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
qVentilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
qWindshield Defrosting and Defogging
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
WARNING
Do not defog the windshield using the
position with the temperature
control set to the cold position:
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog up.
Your vision will be hampered, which
could lead to a serious accident. Set
the temperature control to the hot or
warm position when using the
position.
NOTE
l For maximum defrosting, set the
temperature control dial to the
extreme hot position and the fan
control dial to position 4.
l If warm air is desired at the floor, set
the mode selector dial to the
position.
l In the , or position, the air
conditioner is automatically turned
on (however, the indicator light does
not illuminate) and the
position
is automatically selected to defrost
the windshield.
In the
or position, the
position cannot be changed to the
position.
Interior Comfort
Climate Control System
6-9
Mazda6_8W54-EA-06G_Edition1 Page193
Tuesday, July 25 2006 1:52 PM
Form No.8W54-EA-06G