Marmitek EasyTouch35 - Manual (Page 17)

17 EASYTOUCH 35
12 Setting Key Labels:
You can select which keys are shown or "hidden" in the
display for each of the Device Modes. You can select any
Touchscreen key for change except for the SCREEN, SLEEP,
SEARCH and P
1. Press and hold Setup key until the LED remains on
(occurring after approximately 2-3 seconds) and display
shows the Main Setup Screen.
2. Release Setup key.
3. Press and release the Touchscreen "SCREEN" Key.
4. Display will show the Mode
Setup Screen. Press and release
desired Mode key (TV, VCR,
SAT, etc.) on the rubber keypad.
5. Display will show the SCREEN
Setup Screen. This screen
comprises the current screen
labels for the Mode plus the
SETUP and SCREEN
Touchscreen labels will be
shown. You can now press any
of the Touchscreen panel keys
within the current Mode to
select the individual key label
display required. Use the
"SCREEN" Key to toggle the
screen keys displayed. To Exit,
pressing the Setup or Mute keys will save changed key
label selections and display returns to the Main Setup
Screen. If you want to edit another Mode’s key labels
then press the other Mode key - the Mode you were in is
saved and display changes to the new Mode for any Label
changes.
6. Key Label change routine now complete. Press and release the Touchscreen "EXIT"
key to return to normal operation.
Notes:
1. To reset the displayed Modes key labels back to their Default settings, press and hold
the current Mode key for approximately 3 seconds at Step 4 above until the Main
Setup Screen is shown.
2. These labels are not displayed as part of the Key Label change routine – "SLEEP",
"SETUP", "MACRO", "LEARN", "P
ENGLISH
easytouch35_manual ok 6/17/03 10:30 AM Page 17