Mr. Coffee ECMP2 - Manual (Page 11)

4. lnsert the filter holder into the brew head and place a mug on the drip
tray. Do not fill fil
ter holder with coffee.
5. Plug the machine into the electrical outlet and turn the on/off
switch
ON.
6. Place a cup with cold water under the steam nozzle. Submerge the
tip of the steam tube in the water. Slowly turn the selector control
knob to the On position. After a few seconds close the steam nozzle
by turning the selector control knob to the OFF position. This will
clean any residue left in the nozzle from frothing milk. Next turn the
brew switch to the CUP position. Vinegar will begin to flow through
the filter. Let this process continue until the vinegar in the water
reservoir reaches the minimum line on the water reservoir.
7. When all the vinegar has been pumped out to the minimum level of
the water reservoir, turn the brew switch to the “0” OFF position and
turn the on/off switch to OFF. Allow the machine to cool. Empty the
remaining vinegar from the water reservoir by lifting the lid and
removing the water reservoir. Pour the remaining vinegar down your
sink.
8
Repea
t steps. 1-8 using only tap water to rise any remaining traces of
vinegar out of the machine. Repeat this process twice, allowing the
machine to cool and pressure to be released before repeating.