McIntosh M85 User Manual

Page 9

How to Connect

McIntosh Control Center

1. Connect a data cable from the TUNER 1 DATA IN jack

to the TUNER DATA PORT of a McIntosh Control

Center or preamplifier.

2. Connect a power control cable from the POWER CON-

TROL IN jack to the POWER CONTROL OUT or

ACC jack of a McIntosh Preamplifier, Control Center

or other McIntosh component.

3. Connect shielded cables from the TUNER 1 FIXED

OUTPUTS to the TUNER INPUTS of a preamplifier

or control center.

Note: An optional connection would be to use the TUNER 1

VARIABLE OUTPUTS.

4. Connect the FM Antenna or Cable (from the Cable

Company) to the MR85 Tuner 75W (Ohm) FM

ANTenna connector.

5. Connect with the supplied cable, from the 5 Pin Socket

of the McIntosh RAA1 Remote AM Antenna to the

MR85 Tuner AM ANT DIN socket.

6. Plug the MR85 AC Power Cord into a live AC Outlet.

To AC Outlet