McIntosh M85 User Manual

Page 10

How to Connect with Optional Tuner Module

1. Connect a data cable from the TUNER 1 DATA IN jack

to the TUNER DATA PORT of a McIntosh Multizone

Control Center.

2. Connect a data cable from the TUNER 2 DATA IN jack

to the LOCAL ZONE 1 AUX IN DATA PORT of a

McIntosh Multizone Control Center.

3. Connect a power control cable from the POWER CON-

TROL IN jack to the POWER CONTROL OUT of a

McIntosh Multizone Control Center.

4. Connect shielded cables from the TUNER 1 FIXED

OUTPUTS to the TUNER INPUTS of a McIntosh

Multizone Control Center.

Note: An optional connection would be to use the TUNER 1

VARIABLE OUTPUTS.

5. Connect shielded cables from the TUNER 2 FIXED

To AC Outlet

OUTPUTS to the LOCAL ZONE 1 AUX IN AUDIO

Jacks of a McIntosh Multizone Control Center.

Note: An optional connection would be to use the TUNER 2

VARIABLE OUTPUTS.

6. Connect the FM Antenna(s) or Cable (from the Cable

Company) to the MR85 Tuner 75W (Ohm) FM

ANTenna connector for both Tuner 1 and 2.

Note: If the same FM Antenna or Cable (from the Cable

Company) is used for both Tuner 1 and 2, a suitable coaxial

splitter must be utilized.

7. Connect with the supplied cables, from the 5 Pin Socket

of the McIntosh RAA1 Remote AM Antenna(s) to the

MR85 Tuner AM ANT DIN socket(s) for both Tuner 1

and 2.

8. Plug the MR85 AC Power Cord into a live AC Outlet.