Marantz SR9200 - Manual (Page 51)

47
ENGLISH
GENERAL MALFUNCTION
If the equipment malfunctions, this may be because an electrostatic
discharge or AC line interference has corrupted the information in the
equipment memory circuits. Therefore:
- disconnect the plug from the AC line supply
- after waiting at least three minutes, reconnect the plug to the AC
line supply
- re-attempt to operate the equipment
HOW TO RESET THE UNIT
Should the operation or display seem to be abnormal, reset the unit
with the following procedure.
The SR9200 is turned on, press and hold the
SELECT and AUX1
buttons simultaneously for 3 seconds or more.
Remember that the procedure will reset the settings of the function
selector, Surround mode, delay time, TUNER PRESET etc., to their
initial settings.
Memory backup
• In case a power outage occurs or the power cord is accidentally
unplugged, the SR9200 is equipped with a backup function to
prevent memory data such as the preset memory from being
erased.
POWER ON/STANDBY
STANDBY
VOLUME
UP DOWN
PHONES
SELECT MUTE ATT ENTER
SELECTOR
7.1CH-IN
LD DSS TAPE CD-R TUNER CD TV VCR 1 VCR2/DVD-R
MULTI-SPK
MULTI ROOM
AUX1 S-DIRECT
AUX2 A/D
SLEEP
AUTO-TUNE GYRO TUNING DOWN UP T-MODE F/P
AUX1 INPUT R AUDIO L VIDEO S-VIDEO DIGITAL
MEMO CLEAR DISPLAY
DVD