Meyer Sound M SERIES - Manual (Page 5)

Two compression drivers
mount on a patented REM
coupled to MICA’s horn
High-Frequency Section
MICA is designed to produce the smooth, undistorted high-frequency sound for which the MILO
family is renowned. The high-frequency section located at the center between the two cone drivers
consists of two neodymium-magnet compression drivers with 3-inch diaphragms and 1.2-inch exits.
These drivers are seamlessly combined through a patented Meyer Sound REM (ribbon emulation
manifold) coupled to a 100-degree horizontal constant-directivity horn. The horn’s controlled, very
narrow vertical dispersion is ideally suited for use in curvilinear arrays, allowing minimal destructive
interaction in the high frequencies between adjacent enclosures. REM produces a smoothly controlled
wave front with low distortion and the very high output generated by compression drivers.
The drivers, horn and REM are all next-generation designs created expressly for MICA.
MICA’s 100-degree
constant-directivity horn
A curvilinear array
of 12 MICA cabinets
compact high-power curvilinear array loudspeaker