Murray FT6000X92A - Manual (Page 19)

19 F041303L
Clean Tine Axle Shaft
1. Turn off engine. Engine must be cool.
2. Remove spark plug wire from spark plug and secure.
3. Remove all vegetation, string, wire, and other material
that may have accumulated on the axle between the
inside set of tines and the seal on the transmission
housing.
4. Replace spark plug wire.
Check Tiller Transmission Grease
To add grease, remove both high and low grease ports.
Inject grease in bottom until you see some at top hole,
transmission is now full.
Tiller transmission is shipped from factory with
the proper amount of grease.
grease out,
high grease
port
grease in,
low grease
port
NORMAL CARE
Figure 12