Bracket (refer to figure 1) – M&S Systems WS5 User Manual
Page 5

Page 5
bracket (refer to Figure 1).
C O N N E C T I N G Y O U R S P E A K E R S
The WS5 speakers come with 5-way, gold plated,
binding posts. The binding posts are color-coded for
polarity—red is positive (+) and black is negative (-).
Follow the steps below for connecting your WS5
speakers:
1. Turn off the receiver or amplifier and unplug it from
the power outlet.
2. Use a 2-conductor 16-gauge speaker wire (M&S part
number MS16X5) for runs up to 100 feet. For
additional information on speaker wire runs contact
our Technical Support team at 1-800-366-9422.
N
OTE
: R
EMOVE
ABOUT
2
INCHES
OF
THE
OUTSIDE
JACKET
FROM
BOTH
ENDS
OF
THE
WIRE
THEN
STRIP
APPROXIMATELY
½
INCH
OF
THE
INSULATION
FROM
EACH
CONDUCTOR
AT
THE
SPEAKER
END
. U
SE
THE
RECOMMENDED
STRIP
LENGTH
AS
SPECIFIED
IN
THE
AMPLIFIER
/
RECEIVER
INSTALLATION
MANUAL
Figure 1—Mounting bracket installation