M&S Systems WS5 - Manual (Page 4)

Page 4
U N P A C K I N G Y O U R S P E A K E R S
After carefully unpacking your speakers, the carton
and the packing material should be saved for possible
use later. If any speaker appears to be damaged, do
not attempt to repair or to connect the unit to the
amplifier. Repack the speaker and notify your
distributor or M&S Systems for replacement or repair.
S P E A K E R P L A C E M E N T
The WS5 outdoor speakers can be mounted on an
outdoor canopy or wall or placed on a shelf. They
should be separated by 6 to 8 feet for good stereo
separation. The brackets should be attached to a stud
or mounted using an anchor-screw for a secure
mount.
M O U N T I N G Y O U R S P E A K E R S
The WS5 speakers are packaged with mounting
brackets that allow for either vertical or horizontal
mounting.
N EVER MOUNT THE BRACKETS TO SHEETROCK WITHOUT
SOME TYPE OF ANCHOR .
When attaching the mounting brackets to the speaker,
first connect the speaker wire, then attach the
mounting bracket.
To connect the mounting bracket, secure the speaker
to the bracket using the supplied knob. Line the
bracket up with the speaker and screw the knob into
each end of the speaker to tighten the speaker to the