Mitel 7000 User Manual

Page 29

Text mode
Original mode

-25-

Tag Call

Tag Call allows you to "tag" any threatening call that you receive. Using this
tag, your system administrator can identify the source of the malicious call
and provide this information to appropriate personel or authorities. You can
only tag calls during an active two-party call.

Note: Tagging a call unecessarily may result in fines or other penalties.

To tag a malicious call:

Press the Tag Call feature key. See "Feature Keys" elsewhere in this
guide for information on programming a Tag Call feature key on your
phone.

-OR-

1. Press TRANS/CONF.
2. Dial *55.

If the call was successfully tagged "Thank You" is shown on the display;
otherwise, "Not Allowed" is displayed.