Philips Magnavox MPD820 - Manual (Page 36)

36
Connecting to additional equipment
4 Connect an RF coaxial cable (not supplied) to the RF OUT, ANTENNA OUT, or TO TV
jack on the RF modulator. The RF OUT jack may be labelled differently among different
brands. Refer to the instructions provided with your RF modulator.
Connect the other end of the same RF coaxial cable to the
ANTENNA IN or RF IN jack on your TV.
5 Your RF modulator should have a Channel 3/4 switch.The setting of this switch determines the
TV channel on which you will watch materials playing on the DVD Player.
Set the RF modulator’s Channel 3/4 switch to either 3 or 4, whichever TV channel is
least used in your area. If your RF modulator has a modulator/antenna switch, set it
accordingly. Refer to the instructions that came with the RF modulator.
Turn on your TV and choose channel 3 or 4. Choose the same channel to which you set
the RF modulator’s Channel 3/4 switch.
6 Connect the player’s AC adaptor to a power outlet and turn on the DVD player's
POWER switch to ON. If no disc is in the player, you should see the player's screen
saver on the TV screen.
MPD820_17.qxd 4/2/04 9:11 AM Page 36