MaxTech PCN2000 Series User Manual
Page 3
1
Contents
Section One
Introduction ............................ 1
Section Two
Installation .............................. 2
Section Three Network Driver Installation .. 7
Section Four Troubleshooting ...................... 7
Section Five
Cable Information .................. 9
Section Six
Specifications ........................ 10
Section Seven Technical Support ................ 11
Section Eight Warranty, FCC And Other
Information ........................... 11
Section One - Introduction
Maxtech's PCN2000 Series PCMCIA net-
work adapters are high performance, credit-card
sized Ethernet network adapters. The adapter plugs
into a PCMCIA Type II (or higher) slot providing
a 16-bit bus interface and a 16 KB network data
packet buffer. The adapter also features low-power-
consumption design and is software configurable.
The adapter complies with the Personal Computer
Memory Card Industry Association (PCMCIA)
Release 2.1 Type II standard and also with the
IEEE 802.3 standards for Ethernet.
Minimum hardware requirements are an
IBM AT (or better) fully compatible PC with 512K
RAM running DOS 3.3 or higher, equipped with
a PCMCIA Release 2.1 Type II slot.