Memorex MSP-CR1100 - Manual (Page 12)

11
TROUBLESHOOTING GUIDE
If you experience a problem with this unit, check the chart below before
calling for service.
SYMPTOM
POSSIBLE POSSIBLE
CAUSE SOLUTION
GENERAL
Power does AC line cord not Insert plug firmly
not come on. plugged in. into AC outlet.
RADIO
No sound. ON/OFF/AUTO/BUZZ Set switch to the
switch not set to ON. to ON position.
VOLUME control at Increase the VOLUME.
minimum position.
Noise or sound AM - Interference from Turn the radio for
distorted on AM traffic. better AM reception.
or FM. FM - Antenna Wire Extend Antenna Wire.
not extended.
CLOCK
Flashing time. Battery connected Check the battery.
improperly, not con-
nected or dead.
Clock not set. Set the clock.
Alarm does not ON/OFF/AUTO/BUZZ Set switch to the
turn on. switch not in AUTO or AUTO or BUZZ
BUZZ position. position.
Clock is not set. Set the clock.
Alarm time not set. Set alarm time.
CR1100.O/M.QXD 4/16/02 3:51 PM Page 11