3 using your device in a vehicle, Using the device holder, Connecting the car charger – Mio DIGIWALKER C230 User Manual
Page 11: Using your device in a vehicle
1.3 Using Your Device in a Vehicle
Using the Device Holder
CAUTION:
z
Select an appropriate location for the device holder. Never place the holder where the
driver’s field of vision is blocked.
z
If the car’s windshield is tinted with a reflective coating, an external antenna (optional) may
be needed to route the antenna to the top of the car through a window. When closing the
car window, be careful not to pinch the antenna cable
Use the device holder to fix your device in a vehicle. Make sure that the GPS
antenna has a clear view of the sky.
Note: To remove your device from the holder, slightly push the tab of the holder to release it.
To release:
Connecting the Car Charger
The car charger supplies power to your device when you are using the device in a
car.
CAUTION: To protect your device against sudden surges in current, connect the car charger
only after the car engine has been started.
5