Multitech MT5600BA User Manual
Page 37
Chapter 6 - Callback Security
37
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)
7. Press the
Enter
button again to go to the
PASSWORD SETUP
screen.
8. Press
Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж to go to the
ENTER PASSWORD #2?
screen.
9. Repeat steps 3–7 to enter the next password.
10. Repeat as many times as necessary, up to memory location 30, until all
passwords have been entered.
Warning:
There is no way to review an entry to confirm that it has been entered
correctly. If you attempt to look at a password entry by pressing the
Enter
button for
an
ENTER PASSWORD #
n?
screen, it is possible to accidentally erase the entry.
A
A
A
A
As
s
s
s
ssig
sig
sig
sig
signing Cal
ning Cal
ning Cal
ning Cal
ning Callllllba
ba
ba
ba
bac
c
c
c
ck
k
k
k
k Pho
Pho
Pho
Pho
Phone Numbers
ne Numbers
ne Numbers
ne Numbers
ne Numbers
AT Command Method
AT Command Method
AT Command Method
AT Command Method
AT Command Method
1. Open a data communication program, such as HyperTerminal.
2. To store a callback phone number in the first memory location, type
AT#CBN01=
xxxxxxxxxx
, where
xxxxxxxxxx is the dialing string, and press E
NTER
.
The dialing string can include the digits 0 through 9 and any of the following
characters: #, *, comma (,), semicolon (;), W, A, B, C, and D. Up to 30 characters
can be used. Example:
AT#CBN01=9,16127853000
. If a direct connection with
password protection, but without hangup and callback, is desired, the first
character in the dialing string should be a hyphen (-).
3. To store a callback phone number in the second memory location, type
AT#CBN02=
xxxxxxxxxx
, where
xxxxxxxxxx is the dialing string, and press E
NTER
.
Note that the memory location number in the command is incremented by one.
4. Repeat as many times as necessary, through memory location 30, until all
dialing strings have been entered.
Front Panel Method
Front Panel Method
Front Panel Method
Front Panel Method
Front Panel Method
1. Turn on the modem.
2. Starting at the
STATUS
screen, press the following buttons on the front panel:
И
И
И
И
И, И
И
И
И
И, Ж
Ж
Ж
Ж
Ж, И
И
И
И
И, И
И
И
И
И, Ж
Ж
Ж
Ж
Ж, И
И
И
И
И, И
И
И
И
И, Ж
Ж
Ж
Ж
Ж. The
ENTER NUMBER #1?
screen appears.
3. Press the
Enter
button on the front panel to select memory location 1. The
ENTER NUMBER
screen appears.
4. Press the
З
З
З
З
ЗЕ
Е
Е
Е
Е or И
И
И
И
И
button several times to select the first character. If a direct
connection, without hangup and callback, is desired, the first character in the
dialing string should be a hyphen (-).
5. Press the
Ж
Ж
Ж
Ж
Ж button to go to the next character in the dialing string.
Note:
To backspace or to cancel an entry, press
Ж
Ж
Ж
Ж
Ж several times.
6. The number can be up to 30 characters in length. Repeat steps 4 and 5 until the
number is entered, and then press the
Enter
button to store it. The
NUMBER
STORED
screen should appear.
7. Press the
Enter
button again to go to the
CALLBACK NUMBER
screen.