Multitech MT5600BA - Manual (Page 34)

Chapter 5 - Remote Configuration
34 Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)
3. To change the password, press З З З З ЗЕ
Е Е Е Е or И
И И И И to select the first character of the
password, and then press Ж Ж Ж Ж Ж to go to the next character. Repeat until you have
entered the entire password.
4. To cancel the new password, press Ж Ж Ж Ж Ж until the password is erased. To save the
new password, press the Enter button. The next time you remotely configure the
modem you must use the new password.
C C C C Chang hang hang hang hanging t ing t ing t ing t ing the R he R he R he R he Remote Esc emote Esc emote Esc emote Esc emote Escape C ape C ape C ape C ape Char har har har hara a a a acter cter cter cter cter
To improve security, you can change a remote modem’s remote configuration escape character. The
remote configuration escape character is stored in register
S13 . The factory default is 42, which is the
ASCII code for the asterisk character (*). Setting S13 to 0 (zero) disables remote configuration entirely—
but if you do this remotely, you won’t be able to change it back remotely!
1. Establish a remote configuration link with the remote modem as described in
“Basic Procedure.”
2. Type ATS13= n , where n is the ASCII code for the new remote configuration
escape character, and then press E NTER .
3. Save the new value by typing AT&W and pressing E
NTER
.
4. Type ATO to exit remote configuration.