Mercury Mountaineer 2005 - Manual (Page 28)

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL WITH
HEATED SEATS (IF EQUIPPED)
1. Defrost: Distributes outside air through the windshield defroster
and demister vents. Can be used to clear ice or fog from the windshield.
2. Passenger temperature control: Press to increase/decrease the
airflow temperature for the passenger in the front of the vehicle.
3. R Rear defroster: Press to activate/deactivate rear window
defroster. Refer to Rear window defroster in this section for more
information.
4. DUAL (Dual temperature control): Press to engage/disengage
separate passenger side temperature control.
5. Passenger heated seat control: Press once to activate high heat
setting (2 indicator lights), press again to activate low heat setting (1
indicator light), and press again to deactivate the passenger heated seat.
6. Recirculated air: Press to activate/deactivate air recirculation
in the cabin. Recirculated air may reduce the amount of time to cool
down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculation can be
engaged manually in any other airflow selection except defrost.
Recirculation may turn off automatically in all airflow selections.
7. A/C: Press to activate/deactivate air conditioning. Use with
recirculated air to improve cooling performance and efficiency. Engages
automatically in AUTO, defrost and floor/defrost.
2005 Montego (mgo)
Owners Guide (post-2002-fmt)
USA_English (fus)
Climate Controls
28