beautypg.com

38 rerecording (tape duplication) – Philips Magnavox VRZ242AT User Manual

Page 38

background image

1

Make the connections shown above.

38 Rerecording (Tape Duplication)

3

VCR 2 will record your tape. Insert a blank tape in VCR 2. The
VCR must be in VCR position. (The VCR light will appear on the display
panel. If it does not, press the VCR/TV button once.)

4

Turn on the TV and set it to channel 03 or 04, whichever
channel the CH3/CH4 switch on VCR 2 is set to.

5

Point the remote control at VCR 2. Press Number but-
tons 0, 0, 1 or 0, 0, 2.
(See Helpful Hints at right.)

6

Use the SPEED button to select SP, LP, or SLP at VCR 2.

7

Press the PLAY button on VCR 1 and the REC(ord)/OTR
button on VCR 2 at the same time.
To stop recording, press the STOP/EJECT button on VCR 1, then
press the STOP/EJECT button on VCR 2.

VIDEO

IN

OUT

CH3

CH4

AUDIO

OUT

IN

ANT

VIDEO

IN

OUT

CH3

CH4

AUDIO

OUT

IN

ANT

VCR 1

Playing VCR

VCR 2 - Recording VCR

2

VCR 1 will play your tape. Put a prerecorded tape in VCR 1.

1. Audio cable from AUDIO OUT Jack of
VCR 1 to AUDIO IN Jack of VCR 2

2. Video cable from VIDEO OUT Jack
of VCR 1 to VIDEO IN Jack of VCR 2

3. RF coaxial

cable from VCR’s

OUT Jack to TV’s

ANTENNA IN

Jack

• If you use the AUDIO and VIDEO

IN Jacks on the back of VCR 2,
press Number buttons 0, 0, 1. AV
REAR will appear on-screen.

• If you use the AUDIO and VIDEO

IN Jacks on the front of VCR 2,
press Number buttons 0, 0, 2. AV
FRONT will appear on-screen.

• Unauthorized recording of copy-

righted television programs, video
tapes, or other materials may
infringe on the rights of copyright
owners and violate copyright laws.

• These instructions show you how to

copy tapes using two VCRs like
yours. Different VCRs may operate
differently.

Helpful Hints

Audio and Video cables are not supplied.

VRZ242 LAYOUT 4/9/99 9:25 AM Page 38