Philips Magnavox LCD TV 40MF430B - Manual (Page 17)

English
17
EN
INTR
ODUCTION
PREP
ARA
TION
W
ATCHING TV
OPTIONAL SETTING
TR
OUBLESHOO
TING
INFORMA
TION
salut!
hola!
hi!
11
11.1
TV Screen Display Mode
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal. And 3 types of display
p y
modes can be selected for PC input signal.
Press FORMAT repeatedly to switch the TV aspect ratio.
For 16:9 video signal
Normal
Wide
4:3 Movie Expand
Zoom
Normal displays a 16:9 picture at its original size.
4:3 displays a 16:9 picture at a 4:3 size; the picture
is shortened horizontally. Sidebars appear on both
edges of the screen.
Movie Expand displays a 16:9 picture that is
vertically stretched to fi ll the screen. This only crops
out the top of the picture.
Zoom displays a 16:9 picture at its maximum size
without changing its horizontal and vertical ratio.
Wide displays a horizontally stretched picture. This
crops out the left and right sides of the picture.
For 4:3 video signal
Normal
Wide
16:9 Movie Expand
Zoom
Normal displays a 4:3 picture at its original size.
Sidebars appear on both edges of the screen.
16:9 displays a 4:3 picture at a 16:9 size; the picture is
stretched horizontally to fi ll the screen.
Movie Expand displays a 4:3 picture at a 16:9 size;
the picture is stretched more vertically at the top of
the screen. This crops out the top of the picture.
Zoom displays a 4:3 picture at a 16:9 size; at its
maximum size that is more vertically stretched to fi ll
the screen. This crops out the top and bottom of the
picture.
Wide displays the picture with its center at the
original size and the edges stretched horizontally to
fi ll the screen.
For PC input signal through HDMI1 Input mode
Normal Dot By Dot Full
Normal displays a proportionately stretched picture.
Sidebars appear on both edges of the screen.
Full displays a picture that is stretched out of
proportion horizontally to fi ll the screen.
Dot By Dot displays a picture in its original size.
Sound Functions
describe how to change the audio or the audio language as well as the volume.
Volume Adjustment
Use VOL + / − to adjust the volume.
will be displayed for a few
seconds when adjusting the volume.
Silence Mode
Press MUTE to turn off the sound temporarily.
will be displayed for a few seconds.
• Press MUTE again or VOL + / − to recover the
original volume.
Switching Audio Mode
ATSC
Press SAP repeatedly to cycle through the available P
audio languages.
• Av ailable languages differ depending on the
broadcast.
• [Other] is displayed when the audio language
cannot be acquired, or the acquired languages are
other than English, Spanish or French.
NTSC
Press SAP to display the currently selected audio mode. P
While receiving an MTS broadcast, press repeatedly to cycle through the
available audio channel.
e.g.) When all audio are available
STEREO : Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
Mute
English 1/3
SAP / STEREO
SAP / STEREO SAP / MONO SAP / STEREO
Volume 30