Philips Magnavox VRZ223AT - Manual (Page 27)

One-Touch Recording 27
1
Press the VCR button, then press the CHANNEL o/p
buttons or the Number buttons to select the channel you
want to record.
OTR (0:30)
CH12
2
Press the REC(ord)/OTR button repeatedly until the
desired recording length (30 minutes to eight hours)
appears on-screen. Recording will begin immediately. The REC
light and the Timer light will appear on the display panel.
The One-Touch Recording (OTR) feature allows you to set an
immediate timed recording 30 minutes to eight hours long. Before
you begin:
● Set up the channels at the VCR.
● Select a recording speed (SP, LP, SLP) with the SPEED button.
● Put a tape in the VCR. Make sure the tape’s record tab is intact
and the tape is long enough to record the program(s).
● Place the VCR in VCR position. (The VCR light will appear on
the display panel. If it does not, press the VCR/TV button once.)
3
To stop an OTR before recording is finished, press the
STOP/p button or the POWER button.
To cancel the OTR but continue recording, press the
REC(ord)/OTR button repeatedly until REC appears in the upper
left corner of the TV screen. (STATUS must be set to ON. See
page 20 for details.) The REC light will remain on the display
panel of the VCR, but the Timer light will disappear.
• To check the time remaining for an
OTR after the OTR has been set,
press the STATUS/EXIT button.
• To change the recording length
while an OTR is in progress, press
the REC(ord)/OTR button until the
desired length appears on-screen.
• If you begin an OTR when another
recording is paused, the OTR will
begin.
• You can not pause an OTR.
• If the preset time for a timer
recording comes up during an OTR,
the OTR has priority. The timer
recording will not take place.
Helpful Hints
POWER EJECT
VCR/TV
TV VCR
1 2 3
4 5 6
7 8 9
0
CHANNEL
MUTE
STATUS/EXIT CLEAR MEMORY MENU
REWIND /PLAY F.FWD
REC/OTR PAUSE/STILL /STOP
+100
VOLUME SPEED
VCR PLUS+
1
2
3
VRZ223(H1690).QX33 4/9/99 9:09 AM Page 27