Mitel 5224 IP Phone - Manual (Page 29)

-24-
Call Forward
Call Forward lets you redirect incoming calls to an alternate number.You can
select one of the following forwarding options:
z
Always redirects all incoming calls regardless of the state of your
telephone.
z
B–Int redirects internal calls when your telephone is busy.
z
B–EXt redirects external calls when your telephone is busy.
z
NA–Int redirects internal calls after several rings if you don't answer.
z
NA–Ext redirects external calls after several rings if you don't answer.
Note: For information about "I'm Here?", see Call Forward – Remote.
To program Call Forward:
1. Press ( SUPERKEY ).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. Press # or the Next softkey until the type of Call Forward that you want
to set up appears (see above).
5. On a 5224 IP Phone only, press the Review softkey.
6. If a number is already programmed, press * or the Change softkey .
7. Press * or the Program softkey .
8. Dial the destination number.
If you make an error while dialing, press * or the <— softkey to correct
errors.
9. Press ( DOWN ) or the Save softkey.