Mamiya RZ67 PRO II - Manual (Page 30)

Focusing and Locking the Focusing Knob
Focusing Locking the Focusing Knob
During exposures, the Dark Slide can be
stored in the Dark Slide Slot in the back of
the holder.
The Memo Clip on the back cover can
be used for holding the film box-top as a
film reminder or for holding a piece of
paper with pertinent data.
Depressing the Cocking Lever sets the
mirror, projecting a bright image on the fo-
cusing screen. Focus by rotating either Fo-
cusing Knobs until the image appears sharp.
Please use the large inner knob for fine
focusing.
After adjusting the focus, focus shift can be
prevented by locking the Focusing Knob with
the Focusing Knob Lock Lever, which is
located behind the left hand Focusing Knob.
Simply raise the lever and push it forward,
clamping the Focusing Knob in place.
Refocusing
If the focusing knob is moved accidentally
while it was not locked the image may be out
of focus. Also, be careful that you do not
touch the focusing knob at the down stroke of
the film transport lever.
28