Mamiya RZ67 PRO II - Manual (Page 12)

Mamiya RZ67 PRO II Specifications
Camera Type :6 X 7 cm roll film SLR with lens shutter.
Film Holder :120 Roll Film Holder HA703 ---the standard holder
220 Roll Film Holder HB702
] interchangeable
6x4.5 120 Roll Film Holder RZ
Polaroid Pack Film Holder HP702
Film type :120 film (120 Roll Film Holder HA703) (10 exposure) /120 film
(6x4.5 120 Roll Film Holder RZ) (15 exposures) /220 film (220
Roll Film Holder HB702) (20 exposure) / Instant film (Polaroid
Pack Film Holder HP702)
Negative size:6x7 cm format: 56x69.5 mm / 6x4.5 cm format: 56x41.5 mm /
Polaroid Pack: 70x70 mm
Revolving Back: The back revolves 90° to change from the horizontal to
vertical format or vice versa. Viewfinder format automatically
changes as back revolves.
Lens Mount :Special bayonet mount (with built-in safety lock)
Lens type :110mm f/2.8---the Standard Lenses/ Interchangeable RZ
lenses/Interchangeable lenses for the RB can also be used.
Shutter :Seiko #1 electronic shutter
Shutter release: Body shutter release plus electronic shutter release contacts.
Shutter speed:1/400-8 sec. (with intermediate speeds), B, T (mechanical) /
RBL (when the RB lens used) and AEF (when the AE Prism
Finders used) positions / Mechanical shutter of 1/400 sec.
usable.
Sync operation: with flash sync terminal (X-sync) on lens or hot shoe.
Multiple exposure: possible by means of R-M lever.
Focusing Screen: Type A Matte is the standard / Focusing screens for the RZ
are interchangeable.
Viewfinder :Waist-Level Finder FW702 is the standard interchangeable with
the AE Prism Finder FE701 / Finders for the RZ and RB can also
be used.
Percentage of the field of view visible:95% This information is based on a
linear (horizontal / vertical) measurement.
Film Transport:A single 114° stroke of the Cocking Lever advances the film
and Exposure Counter, sets the Mirror and Light Baffle, and
cocks the shutter.
10
• Specifications and appearance are subject to change without notice.
Focusing Method: The Rack and pinion focusing extends the built-in bellows
up to a maximum of 46 mm /Equipped with a Focusing Knob
and Lock Lever/ With subject distance and exposure factor
indications.
Winder :RZ Winder
II (RZ Winder I cannot be used)
Cable release contact:The shutter can be released by mean of a cable
release connected to a contact on the camera body / Remote
control is possible by means of a receiver connected to the
same contact.
Battery Type: One alkaline-manganese battery (4LR44) or silver oxide Bat-
tery (4SR44) to operate the body / Six AA size Ni-Cd
batteries or one special AC adapter (DC9V) for driving the winder.
Safety features (in normal shutter release operation):
• Viewfinder display (by LEDs and pictorial symbols):
Warning on incomplete cocking lever setting / Warning on failure
to pull out the dark slide / Battery check.
• Electronic alarm sound when : The shutter speed dial is at the "RBL" position
when an RZ lens is used /The shutter dial is at the "AEF" position
when the AE Prism Finder is removed / The shutter speed dial is
any other position than "RBL" when no lens is mounted or an RB
lens is mounted on the camera / The battery power has dropped.
• Release locked when : The cocking lever has been set incompletely / The dark
slide has not been pulled out / The shutter speed dial is at the
"RBL" position when an RZ lens is used /The shutter speed dial is
at the "AEF" position when the AE Prism Finder is removed / The
shutter speed dial is at any other position than "RBL" when there
is no lens on the body or an RB lens is mounted on the camera.
Dimensions :108 mm (width) X133.4 mm (height) X 211.5 mm (length).
Weight :2,490g when the body (1,350g) (with Waist-Level Finder), 120
Roll Film Holder (530g) and 110 mm f/2.8 lens (610g) are
combined.