Mercury INSTALLATION MANUAL D7.3L D-TRONIC - Manual (Page 66)

D7.3L D-TRONIC DIESEL ENGINES - BRAVO MODELS
Page 66 of 90
14. Secure drive unit to bell housing with 5 flat washers and 6 locknuts. Torque to 50 Ib. ft.
(68 N ⋅ m).
71244
b
a
a -
Do Not Install Flat Washer Here
b -
Elastic Stop Nuts (6) and Flat Washers (5)
IMPORTANT: On Bravo One, Two and Three Models, the “Trim-In Limit Pin Insert”
must be properly positioned before installing the trim cylinder anchor pin in the fol-
lowing steps.
15. Ensure that the Trim-In Limit Pin Insert is positioned as shown for the appropriate Bravo
model.
75157
a
Bravo One and Two (Insert Positioned Forward)
75158
a
Bravo Three (Insert Positioned Aft)
a -
Trim-In Limit Pin Insert