Mercedes-Benz SL 600 - Manual (Page 150)

149
Controls in detail
Control system
̈ Press æ or ç to change the
easy-entry/exit setting.
The following settings are available for the
easy-entry/exit feature:
Setting key-dependency
Use this function to set whether the mem-
ory settings for the seats, the steering
wheel and the exterior rear view mirrors
mirrors should be stored separately for
each SmartKey (
୴ page 114).
̈ Move the selection marker with button
æ or ç to the
Convenience sub-
menu.
̈ Press button j or k repeatedly
until you see this message in the left
display:
Key-dependent .
The selection marker is on the current
setting.
̈ Press æ or ç to set key-depen-
dency to On or Off .
Setting parking position for exterior rear
view mirror
Use the Mirror setting when parking
function to select whether the passen-
ger-side exterior rear view mirror should be
turned downward during parking maneu-
vers when reverse gear R is engaged. For
additional information, see “Activating ex-
terior rear view mirror parking position”
(
୴ page 167).
̈ Move the selection marker with button
æ or ç to the
Convenience sub-
menu.
̈ Press button j or k repeatedly
until you see this message in the left
display:
Mirror setting when park-
ing .
Off The easy-entry/ex-
it feature is deacti-
vated
Steer. column Only the steering
column is moved
Steer.col. +seat Both, the steering
column and the
seat are moved ୴୴