Monitor Audio BX Series - Manual (Page 11)

grilles
All of the Bronze BX speakers come with grilles covered in acoustically transparent cloth.
The grilles are held invisibly in place by magnets in both the grille and the cabinet (except
BX-FX). They are contained within the separate card packaging.
To fit them, firstly ensure they are the correct way up (badge at the bottom) and offer them
up to the cabinet. The magnets should them pull it into position.
The BX-FX comes with the grilles factory fitted. If you wish to remove them, carefully prize
them away from the cabinet with the tips of your fingers. There are three separate grilles
fitted to each BX-FX cabinet.
CAUTION: Do not lift or move the loudspeaker with the grilles fitted. If any movement
needs to be done, please remove the grilles first.
FiXing the BX-FX to a wall
CAUTION: You will need to determine where the BX-FX will be fixed and the structure
of the wall. For safety reasons, if you are unsure of your ability to provide a secure and
safe fixing, do not attempt to fix these speakers to your wall, please obtain the services
of a competent and qualified trades person.
CAUTION: Ensure that there are no water pipes or electricity cables running behind
where the wall brackets are going to be secured. Work from secure steps and avoid
trailing wires.
We do not supply wall fixing screws and plugs with the BX-FX. Please use suitable fixings
for the type of wall construction the BX-FX’s will be fixed to.
To fix your BX-FX’s to the wall, we would recommend using the wall fixing template enclosed
within the packaging carton.
monitoraudio.co.uk 9
Bronze BX Manual.indd 9 10/03/2010 10:55:34