MITSUBISHI ELECTRIC Pro 930SB - Manual (Page 6)

6
Recommended use
Safety Precautions and Maintenance:
• DO NOT OPEN THE MONITOR. There are no user serviceable
parts inside and opening or removing covers may expose you
to dangerous shock hazards or other risks. Refer all servicing
to qualified service personnel.
• Use the monitor in a clean, dry area.
• Do not spill any liquids into the cabinet or use your monitor
near water.
• Do not insert objects of any kind into the cabinet slots, as they
may touch dangerous voltage points, which can be harmful or
fatal or may cause electric shock, fire or equipment failure.
• Do not place any heavy objects on the power cord. Damage to
the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart, stand
or table, as the monitor may fall, causing serious damage to
the monitor.
• To separate the equipment from the power source you have to
remove the plug from the inlet socket.
• In the UK, use a BS-approved power cord with a molded plug
having a black (5 A) fuse installed for use with this monitor. If a
power cord is not supplied with this monitor, please contact
your supplier.
• When operating the Diamond Pro 930 SB with the AC 100 - 240
V power source in EU countries except UK, use the power cord
supplied.
Cleaning Your Monitor
A special coating is provided on the glass (CRT) surface of this
monitor to reduce a reflection and static electricity on the glass
surface. Due to the delicate coating on the glass surface, use a
lint-free, non-abrasive cloth (cotton or equivalent) and a non-
alcohol, neutral, non-abrasive cleaning solution to minimize dust.
If the screen requires more than a light cleaning, apply a soft
neutral detergent and water directly to a soft cloth and use it upon
wringing water, to clean the glass surface. Clean your monitor
regularly.
CAUTION: The following agents will cause damage to the CRT
when cleaning the glass surface: Benzene, thinner, acid/alkaline
detergent, alcohol detergent, detergent with abrasive powder,
detergent with anti-static agent, detergent for cleaning.
Immediately unplug your monitor from the power outlet and refer
servicing to qualified service personnel under the following
conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled, or objects have fallen into the moni-
tor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet damaged.
• If the monitor does not operate normally by following operating
instructions.
• Allow adequate ventilation around the monitor so
that heat can properly dissipate. Do not block venti-
lated openings or place the monitor near a radiator
or other heat sources. Do not put anything on top of
the monitor.
• The power cable connector is the primary means of
detaching the system from the power supply. The
monitor should be installed close to a power outlet
which is easily accessible.
• Handle with care when transporting. Save packag-
ing for transporting.
CORRECT PLACEMENT AND ADJUSTMENT
OF THE MONITOR CAN REDUCE EYE,
SHOULDER AND NECK FATIGUE. CHECK
THE FOLLOWING WHEN YOU POSITION
THE MONITOR:
• Adjust the monitor height so that the
top of the screen is at or slightly be-
low eye level. Your eyes should look
slightly downward when viewing the
middle of the screen.
• Position your monitor no closer than
40 cm and no further away than
60 cm from your eyes. The optimal
distance is 50 cm.
• Rest your eyes periodically by focus-
ing on an object at least 6 m away. Blink often.
• Position the monitor at a 90° angle to windows and other light
sources to minimize glare and reflections. Adjust the monitor
tilt so that ceiling lights do not reflect on your screen.
• If reflected light makes it hard for you to see your screen, use
an anti-glare filter.
• Adjust the monitor’s brightness and contrast controls to en-
hance readability.
• Use a document holder placed close to the screen.
• Position whatever you are looking at most of the time (the screen
or reference material) directly in front of you to minimize turning
your head while you are typing.
• Get regular eye checkups.
Ergonomics
To realize the maximum ergonomic benefits, we recommend the
following:
• Adjust the Brightness until the background raster disappears.
• Do not position the Contrast controls to its maximum setting.
• Use the preset Size and Position controls with standard
signals.
• Use the preset Colour Setting and Sides Left/Right controls.
• Use non-interlaced signals with a vertical refresh rate between
75 - 160 Hz.
• Do not use primary colour blue on a dark background, as it is
difficult to see and may produce eye fatigue due to insufficient
contrast.
• Keep the monitor away from high capacity transformers, electric
motors and other devices such as external speakers or fans,
which may create strong magnetic fields.
• If possible, position the monitor so that it is facing the east to
minimize the effects of the earth ’s magnetic field.
• Changing the direction of the monitor while it is powered on
may cause image discolouration. To correct this, turn the
monitor off for 20 minutes before powering it back on.
CAUTION
English
Declaration of the Manufacturer
We hereby certify that the colour monitors
Diamond Pro 930 SB
is in compliance with
Council Directive 73/23/EEC:
– EN 60950
Council Directive 89/336/EEC:
– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
and marked with
NEC-Mitsubishi Electric Visual Systems Corporation
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN