Miele NOVOTRONIC G 856 SC ELITE - Manual (Page 32)

At the end of a program
The "End" indicator will light when the
program has finished.
^ Turn the program selector (17) to
"Stop".
The "End" (14) indicator will go out and
the "Start" (19) indicator will flash.
^ Press the "On/Off" (13) button.
The "Start" (19) indicator will go out.
^ Open the dishwasher door slightly to
allow the dishes to cool before un-
loading.
It is advisable to turn off the water
supply if the dishwasher will not be
used for a period of time (e.g. while
vacationing).
Interrupting a program
A program is interrupted as soon as the
door is opened.
If the door is closed, the program will
continue from where it was interrupted.
,
Water in the dishwasher may be
hot. There is a danger of being
burned!
Only open the door if absolutely
necessary.
Changing a program
If a program is running:
^ Turn the program selector (17) to
"Stop" for at least one second.
^ Turn the program selector (17) to the
new program.
^ Select "Top Solo" and "Delay Start" if
needed (see "Additional features").
^ Press the "Start" (19) button to begin
the wash program.
If a program has not started:
^ Turn the program selectro (17) to the
new program.
^ Select "Top Solo" and "Delay Start" if
needed (see "Additional features").
^ Press the "Start" (19) button to begin
the wash program.
Operation
32