Miele NOVOTRONIC G 856 SC ELITE - Manual (Page 15)

^ Press the "Top Solo" button.
The "Top Solo" indicator will light.
^ Turn the program selector to "Stop".
^ Turn off the dishwasher.
The programmed water hardness is
stored.
Checking the programmed water
hardness
^ Make sure the dishwasher is turned
off.
^ Turn the program selector to "Stop".
^ Press and hold the "Top Solo" button
and at the same time turn on the
dishwasher with the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator will flash.
If the "Rinse aid" indicator comes on,
the rinse aid dispenser needs to be
filled.
If any other indicator is lit or flashing,
the above steps must be repeated.
^ Turn the program selector clockwise
until the "Top Solo" indicator comes
on.
The position where the "Top Solo" indi-
cator comes on corresponds to the pro-
grammed water hardness (see table in
"Programming the water softener").
^ Turn the program selector to "Stop".
^ Turn off the dishwasher.
Before using for the first time
15