Morphy Richards 40734 - Manual (Page 4)

›
fi fl
‹
¤
⁄
‰
„
‚
·
Â
‡
4
COMPONENTS
OF YOUR IRON
⁄ Soleplate
¤ Spray nozzle
‹ Filling hole with cap
› Variable steam switch
fi Shot of steam button
fl Spray button
‡ Auto shut-off indicator light
(certain models only)
· Temperature indicator light
(red)
‚ Life long anti-scale
(certain models only)
„ Water tank (illuminated on
certain models)
‰ Temperature control dial
with indicator
 Graduated filling beaker
BEFORE USE
Sort out the items to be
ironed according to the
type of fabric. This will
minimise the frequency of
temperature adjustment for
different garments.
Note: The steam facility
should only be used on
garments which are
suitable for ironing at the 2
and 3 dot settings.
When ironing with the
steam facility at the 2 dot
setting, the steam output
should be set at the lower
end of the steam range
(see the ‘Variable steam’
section on page 5).
Textiles and clothes are
supposed to carry ironing
instructions. If they don’t,
you should follow the
fabric guide on page 3, but
be sure to test the
temperature by ironing the
hem of the garment or
similar area first.
If you turn the control dial
‰ down from a hot setting
to a cooler setting, wait
until the iron temperature
has stabilised before you
continue ironing.
Delicate fabrics such as
silk, wool, velour, etc, are
best ironed with an ironing
cloth to prevent shine
marks.
FILLING
1 Make sure that the iron is
not plugged in, then set
the variable steam control
› to the ‘0’ position
before filling the iron with
water.
2 Lift up the filler cap ‹ and
pour water through the
hole into the water tank
„,
using the beaker provided
 A.
After filling, replace the fill
cap.
IN HARD WATER AREAS,
THE USE OF DISTILLED
OR DEMINERALISED
WATER IS
RECOMMENDED.
WARNING: Never use
battery topping up fluid
or water containing any
substances like starch,
or sugar, or defrosted
water from a refrigerator.
3 Always pour out the
remaining water after use.
WARNING: When filling
your iron with tap water,
always use the beaker
provided. Never fill
directly under the tap.
Tank capacity
• Models 40704 / 40709 /
40732 / 40733:
Advise 400ml
• Model 40734:
Advise 350ml
A
UK Helpline 0844 871 0953 Replacement Parts 0844 873 0719 Ireland Helpline 1800 409 119
RN40704 MUK Rev3:RN40704 MUK Rev3 19/02/2009 15:51 Page 4