MITSUBISHI ELECTRIC Diamond Plus 230SB - Manual (Page 13)

English
English-11
Features
Flat Aperture Grille CRT: Delivers an unparalleled viewing experience with a virtually flat image, eliminating distortion and
reducing glare so that what you see on-screen is what you get on your printed output. The striped phosphor alignment of the
CRT delivers superior vertical definition with improved bright-ness for more uniform image contrast.
OptiClear Screen Surface: Reduces reflection and glare and increases contrast without sacrificing focus level, clarity or
brightness. Along with the flat square technology CRT, a high contrast screen with 0.24 mm grille pitch delivers crisp, clean
text and graphics.
Dual Dynamic Beam Focus: Provides precise, continuous focus adjustments of the electron beams and optimum image
quality, even to the far edges of the screen.
Colour Control System: Allows you to change between five colour settings on your display to match your personal
preference.
OSM (On-Screen Manager) Controls: Allows you to quickly and easily adjust all elements of your screen image via simple to
use on-screen menus.
ErgoDesign Features: Enhances human ergonomics to improve the working environment, protect the health of the user and
save money. Examples include OSM controls for quick and easy image adjustments, tilt/swivel base for pre-ferred angle of
vision and compliance with MPRII guidelines for lower emissions.
Plug and Play: The Microsoft ® solution with the Windows ® 95/98/2000/Me/XP operating system facilitates setup and
installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your
computer, automatically optimizing display performance.
IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a
lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions
and lowering the air conditioning costs of the workplace.
Reduced Magnetic Field Technology: Reduces magnetic and alternating electric field emissions and static electricity,
addressing ergonomic concerns regarding potential risks from extended computer monitor use.
Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying the
resolution required.
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.
GlobalSync /Corner Purity Control: Mitsubishi’s unique design automatically eliminates picture impurities that may result
from stray magnetic fields (including the earth’s permanent magnets,etc.) and now allows you to easily adjust impurities in the
four corners of your monitor.
Convergence Control: Allows you to adjust the horizontal and vertical convergence ensure that a white line drawn on the
screen is as crisp and clear as possible.
Auto Adjust: Allows you to easily and quickly adjust and position for Non-preset timming.
GTF Auto Adjust: Automatically adjust horizontal and vertical size and position settings according to GTF standard with the
signal timing which Auto Adjust is not available.
Constant Brightness: Sustains the brightness and screen colour levels consistently over the normal life of the monitor.
SB (Super Brightness) Mode: Provides the screen brightness suitable for the screen images displayed.
Super Bright Mode OFF: for text based images (normal use)
Super Bright Mode-1 ON: for images
Super bright Mode-2 ON: for moving image such as DVD movies