beautypg.com

Specifications – MITSUBISHI ELECTRIC Diamond Plus 230SB User Manual

Page 12

background image

English-10

Specifications

Monitor Specifications

Diamond Plus 230

SB

Monitor

Notes

Picture Tube

Diagonal:

22 inch/550 mm

90° deflection, 0.24 mm grille pitch,

Viewable Image Size:

20 inch/508 mm

medium short persistence phosphor,
aperture grille CRT, G-WARAS coating

Input Signal

Video:

ANALOG 0.7 Vp-p/75 Ohms

Sync:

Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Negative) (TTL Level)

Display Colours

Analog input:

Unlimited number of Colours

Depends on display card used.

Synchronization Range

Horizontal:

30 kHz to 115 kHz

Automatically

Vertical:

50 Hz to 160 Hz

Automatically

Resolutions Supported

640 x 480 @ 50 to 160 Hz

Some systems may not support all

Resolution based on horizontal and

800 x 600 @ 50 to 160 Hz

modes listed.

vertical frequencies only

1024 x 768 @ 50 to 138 Hz
1280 x 1024 @ 50 to 105 Hz
1600 x 1200 @ 50 to 91 Hz ...................... NEC-Mitsubishi Electronics Display cites
1800 x 1350 @ 50 to 81 Hz

recommended resolution a 85 Hz for

1800 x 1440 @ 50 to 76 Hz

optimal display performance.

1856 x 1392 @ 50 to 79 Hz
1920 x 1440 @ 50 to 76 Hz

Active Display Area

Horizontal:

396 mm/15.6 inches

Dependent upon signal timing used, and

(Factory Setting)

Vertical:

297 mm/11.7 inches

does not include border area.

Active Display Area (Full Scan)

406 mm/16.0 inches

Dependent upon signal timing used, and

304.6 mm/12.0 inches

does not include border area.

Power Supply

AC 100-120 V/220-240 V, 50/60 Hz

Current Rating

1.25A @ 100-120 V / 0.6A @ 220-240 V

Dimensions

495 mm (W) x 484.5 mm (H) x 471 mm (D)
19.5 inches (W) x 19.1 inches (H) x 18.5 inches (D)

Weight

29.0 kg
64.0 lbs

Environmental Considerations

Operating Temperature:

+5°C to +35°C/+41°F to +90°F

Humidity:

10% to 90%

Altitude:

0 m (0 ft) ~ 3,000 m (10,000 ft)

Storage Temperature:

-20°C to +60°C/-4°F to +140°F

Humidity:

10% to 90%

Altitude:

0 m (0 ft) ~ 15,000 m (50,000 ft)

NOTE:

Technical specifications are subject to change without notice.