Memorex MD6447 - Manual (Page 9)

8
CD OPERATION (CONTINUED)
60 SECOND ELECTRONIC ANTI-SHOCK SYSTEM
This CD player has a built-in Anti-Shock System that cuts down on CD skipping,
which is useful when using the CD player in the car or while jogging/walking.
Follow the steps below to activate and understand the Anti-Shock System:
Open the CD compartment lid by
sliding the CD OPEN switch to the
right. Gently press a disc, label side
up, onto the spindle until it locks in
place. Close the CD compartment lid.
Insert headphones into the PHONES
jack.
2
1
With a CD inserted, press the
PLAY/PAUSE (
®p
)/POWER ON
button to turn the unit on and start
playback.
2
2
The Anti-Shock System will start
automatically, the sound will mute for a
moment and the display will blink
“ESP”.
Within a few seconds, “ESP” will light
solid to indicate music signals are
stored in memory.
3
CONTINUED ON THE NEXT PAGE
If the CD player is subject to vibration
during playback, “ESP” will blink
again. During the vibration, the music
should continue to play the signals
stored in the memory until the CD
player can read the music data
properly from the disc.
4