Memorex MD6447 - Manual (Page 13)

12
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE (®p)/POWER ON button 1
to turn the unit on and press the STOP
(■)/POWER OFF button 2 to stop auto
playback. Press the PROG button 3; the
Track “00” and PROG indicator will blink.
Also, the program “01” will appear in the
display.
1 2
3
1
Select the first track to be played back
using the SKIP/SEARCH o 1 or n
❷
button, then press the PROG button ❸
again. Repeat this step to program
additional tracks up to a maximum of 20
tracks.
1 3
2
2
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Press the PLAY/PAUSE (
®p
)
/POWER ON button ❶ to begin
Programmed playback and adjust the
VOLUME control ❷ and DBBS switch
❸
as desired.
3
2
1
3
To skip forward or backward through
the programs, press the SKIP/
SEARCH o 1 or n ❷ button. When
the disc is through playing, it will stop.
1
2
4
NOTES:
• Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
• Press the STOP (■)/POWER OFF button while in the Stop mode to turn the unit off and
clear the Program memory.
• As each program is played, the track number is shown in the display.
• Programming is the ability to preselect the order in which a series of tracks will be
played.
• Each track may be stored in the program memory as many times as desired (up to 20
tracks).
• To play the Program on Repeat, simply press the MODE button twice while playing the
Program.