Step 1, Step 2 step 4 step 3, Ontrols – Maytag MD55 User Manual

Page 6: Lance

ONTROLS

T A

LANCE

Sensor Dry –

automatically senses the moisture in the load

and shuts the dryer off when the selected dryness level (very

dry to damp dry) is reached.This cycle is recommended for the

majority of loads including delicates, wrinkle free and

cotton/sturdy items like towels, bedding and jeans.

Time Dry –

may be selected for any load if sensor dry is not

used. Press the “+” or “–” time pad to select the desired number

of minutes.

Dry Temp –

there are four temperature settings. Press the

up “ ” or down “ ” pads to select regular, medium, delicate

or extra low temperatures.

Regular

– for sturdy cottons or those labeled “Tumble

Dry.”
Medium

– for permanent press, synthetics, lightweight cot-

tons or items labeled “Tumble Dry Medium.”
Delicate

– for heat sensitive items labeled “Tumble Dry

Low” or “Tumble Dry Warm.”
Extra Low

– provides the lowest heated dry temperature

possible. Extra low temperature is lower than delicate.

Setting the Signal –

the end of cycle signal is adjustable.

Press the “+” or “–” signal pad to increase or decrease the

volume of the signal.

Select Dryness Level –

press the “ ” or “ ” arrow pads

to select the desired dryness level.The dryness level can be set

on or between a setting.

Very Dry –

used to completely dry sturdy or bulky items

including towels and jeans.

Normal –

used for drying the majority of loads.

Damp Dry –

designed to partially dry items. Used for items

that lay flat or hang to dry.

Step 1

Step 2

Step 4

Step 3