Martin Audio AQ5 - Manual (Page 5)

AQ5
Ultra-compact, wide angle system
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2005 Martin Audio Ltd.
www.martin-audio.com
5 of 5
architectual
architectural and engineering specifications
The loudspeaker system shall be of the two-way passive
type consisting of two 5.25" (130mm) full-range ICT™
drivers each fitted with a concentric 1" (25mm) high
frequency diaphragm, loaded by a phase plug and
waveguide. The transducers shall be mounted in a
reflex loaded enclosure constructed of structural
foamed ABS and fitted with threaded inserts to match
the mounting hardware. 4 or 16 ohm operation shall be
selected by a switch at the rear of the enclosure.
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
120Hz-20kHz ±3dB.
High frequency dispersion at -6dB points shall be
120˚H x 60˚V.
Power handling shall be 75W AES, 300W peak.
Rated impedance shall be 4 ohms (16 ohms switchable).
Maximum SPL measured at 1 metre on axis shall be
109dB continuous, 115dB peak.
Dimensions (W) 282mm x (H) 172mm x (D) 180mm
(11.1ins x 6.8ins x 7.1ins).
Weight 3.5kg (8lbs).
The loudspeaker system shall be the Martin Audio AQ5.
Notes
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(4) Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.
(5) Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.
(6) Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(7) Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.
Trade Descriptions Act
Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
technical specifications
TYPE Ultra-compact, Dual ICT™, wide dispersion
vented trapezoid
FREQUENCY RESPONSE (1) 120Hz-20kHz ± 3dB
DRIVERS
2 x 5.25" (130mm) ICT™ full-range drivers
RATED POWER (2) 75W AES, 300W peak
RECOMMENDED 75-150W into 4 ohms
AMPLIFIER
SENSITIVITY (6)
91dB
MAXIMUM SPL (7) 109dB continuous, 115dB peak
NOMINAL IMPEDANCE Externally switchable 4 or 16 ohms
DISPERSION (-6dB) 120º horizontal, 60º vertical
CROSSOVER ICT™
ENCLOSURE 5 litre, structural foamed ABS
FINISH Textured light grey paint
PROTECTIVE GRILLE Light grey perforated steel
CONNECTORS Low profile 12 amp push-lock
FITTINGS 4 x M6 inserts for bracket
1 x M6 insert for safety point
OPTIONS 30W 100/70V line transformer
DIMENSIONS (W) 282mm x (H) 172mm x (D) 180mm
(W) 11.1ins x (H) 6.8ins x (D) 7.1ins
WEIGHT 3.5kg (8lbs)
accessories
AQWB6 Wall Bracket
AQCB6 Ceiling Bracket