Miele HG01 - Manual (Page 11)

2. Install the mounting
brackets
To ensure stability this dishwasher
should be securely attached to the
countertop with the two mounting
brackets included.
^ Insert the tab of each bracket into the
guide holes on top.
Stone or marble countertops:
The dishwasher must be secured to the
adjacent cabinets with fixing angles
(part # 03 341 080), available from
Miele’s Technical Department.
3. Install the slide skis
Two slide skis are included and should
be installed on the feet of the dish-
washer before the machine is pushed
under the countertop. This will allow the
machine to slide easier, protect the
floor, and allow adjustment of the rear
leveling legs from the front of the ma-
chine.
^ First, adjust the height of the legs so
that the top of the dishwasher is
roughly
1
/
8
" (3 mm) below the
countertop.
Tipping the machine slightly to the rear,
if possible, will make adjusting the front
legs easier. Make sure the machine is
level when adjustments are complete.
^ Place the skis, with the ratchet at the
rear, under the dishwasher legs.
Installation
11